Panasonic KX-TVS95 Installation Manual page 224

A1 SYSTEM FEATURES
Table A-1
FEATURE
Caller Name allows subscribers to assign up to 30 Caller
ID numbers and record a caller name for each
Announcement
Caller ID number from their telephone. The
—Personal
caller name is announced when: (1)
(APT/DPT
subscribers listen to the messages from
Integration Only)
assigned numbers left in their mailboxes, (2)
the VPS transfers calls from assigned
numbers to the subscribers (Caller ID
Screening), and (3) the VPS pages the
subscribers by intercom (Intercom Paging).
Caller ID Screening is enabled or disabled in
the COS (Class of Service) settings.
If the same Caller ID number is programmed
for both the system and personal caller name
announcement, the VPS will use the personal
caller name.
Caller Name allows the System Administrator to assign up
to 120 Caller ID numbers. Each Caller ID
Announcement
number can have a caller name recorded by
—System
the Message Manager. The caller name is
(APT/DPT
announced when: (1) extension users listen
Integration Only)
to the messages from assigned numbers left
in their mailboxes, (2) the VPS transfers calls
from assigned numbers to the subscribers
(Caller ID Screening), and (3) the VPS pages
the subscribers by intercom (Intercom
Paging).
Caller ID Screening is enabled or disabled in
the COS (Class of Service) settings.
If the same Caller ID number is programmed
for both the system and personal caller name
announcement, the VPS will use the personal
caller name.
224 Installation Manual
DESCRIPTION REFERENCES
• See 4.1 GUIDELINES FOR
DIGITAL INTEGRATION.
• See "Number of CIDs for Caller
Name Announcement" and
"Caller ID Screening" in Table
B-6 in B3 SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
• See "Caller Name
Announcement (System/
Personal) " in the Glossary.
• See 4.12 Personal Caller
Name Announcement in the
Subscriber's Guide.
• See 4.1 GUIDELINES FOR
DIGITAL INTEGRATION.
• See "Caller ID Screening" in
Table B-6 in B3 SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See B6.6 System Caller Name
Announcement.
• See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
• See "Recording System Caller
Names" in D6 RECORDING
MESSAGES.
• See "Caller Name
Announcement (System/
Personal) " in the Glossary.