Table of Contents
Advertisement
Table 5-7
Description
Covering
Extension
Interview
Mailbox
Number
All Calls
Transfer to
Mailbox
Caller ID
Number 1
for Toll
Saver
Caller ID
Number 2
for Toll
Saver
DID Number
for Toll
Saver
Value Range
(Default)
Specifies where a caller will be transferred when
2-5 Digits
Covering Extension is dialed or set under Incomplete Call
(None)
Handling.
Used to permit mailbox owner to have an interview
2-5 Digits
mailbox. Must be an unused mailbox.
(None)
If set to Yes, calls coming to the extension through
1. Yes
Automated Attendant go directly to the mailbox without
2. No
ringing the extension. (Message Waiting Lamp will not be
(No)
turned on.)
Up to 20 digits
Specifies up to two Caller ID numbers or a DID number
consisting of 1-9,
for Toll Saver. The subscriber can check whether there
are new messages in his mailbox with these phone
0,
numbers without incurring telephone charges. Note that
(None)
when these phone numbers are specified by the
subscriber, the phone numbers are unavailable to other
subscribers in the system. (The phone numbers must be
unique.)
Notes
•
•
5.5 SETTING MAILBOXES
Description/Function
If Toll Saver is set to "Caller ID" in your Class of
Service, a DID number for Toll Saver cannot be
assigned. If Toll Saver is set to "DID number" in
your Class of Service, Caller ID Number 1/2 for
Toll Saver cannot be assigned. If Toll Saver is
set to "No" in your Class of Service, neither
Caller ID Numbers nor a DID number can be
assigned.
DID number setting for this feature is only
available when the VPS is connected to the
following PBXs with DPT Integration.
• KX-TD816 (P311Q or higher)
• KX-TD1232 (P211Q or higher)
• KX-TD500 (V4M or higher)
Installation Manual
167
Advertisement
Table of Contents
Troubleshooting
