Table of Contents
Advertisement
3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs
[Recommended Settings (3)]
If the VPS answers when an Incoming Call Distribution Group does not take the call after a
specified time:
a)
Assignment of DIL 1:1 line
1)
Go to the "10.CO & Incoming Call-2.DIL Table & Port Setting" screen.
2)
Assign "DIL Destination Day/Night/Lunch/Break" for each trunk (outside line) to
a specific extension number (floating extension number of the Incoming Call
Distribution Group).
3)
Click "Apply" to save the changed data.
Notes
•
•
80
Installation Manual
Screen output:
The above screen output is an example of the KX-TDA200.
For more information on programming the Incoming Call Distribution Group
(e.g., VM Group Assignment, Incoming Call Distribution Group Member
Assignment), refer to the KX-TDA/KX-TAW series manuals.
For example, if the "DIL Destination" for the Incoming Call Distribution Group is
assigned to floating extension number 290, the above screen will be displayed.
Advertisement
Table of Contents
Troubleshooting
