Table of Contents
Advertisement
*1
Not available for COS No.63 (Message Manager) and COS No.64 (System Manager)
*2
Not available for COS No.64 (System Manager)
Note
While the System Administrator programs via a personal computer, the System
Manager cannot set COS parameters. The VPS plays "Sorry, this function is not
available".
1.
Log in the Main Menu.
2.
Press [6] for Other Features.
3.
Press [2] to set Class of Service.
4.
Type the Class of Service Number (1-64).
New Message Retention Time
5.
a)
The current setting plays. Press [1] to change the current time.
b)
Type the retention time (up to 30 days or 0: Unlimited).
c)
Confirm the entry is correct and Press [2] to accept it.
Saved Message Retention Time
6.
a)
The current setting plays. Press [1] to change the current time.
b)
Type the retention time (up to 30 days or 0: unlimited).
c)
Confirm the entry is correct and Press [2] to accept it.
Message Length
7.
a)
The current setting plays. Press [1] to change the current length.
b)
Type the message length (1-6 min or 0: unlimited).
c)
Confirm the entry is correct and Press [2] to accept it.
Number of Messages
8.
a)
The current setting plays. Press [1] to change the current number.
b)
Type the number of messages (5-100).
c)
Confirm the entry is correct and Press [2] to accept it.
C3 SETTING COS (CLASS OF SERVICE) PARAMETERS
Installation Manual
345
Advertisement
Table of Contents
Troubleshooting
