Table of Contents
Advertisement
B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS
Table B-6
Parameter
MWL
1. Yes
2. No
Notification for
Unreceived
Message
Device
1. Yes
2. No
Notification for
Unreceived
Message
Authorization for
1. Yes
2. No
External Message
Delivery
Prompt Mode
1. System
2. User 1
3. User 2
4. Selective
Authorization for
1. Yes
2. No
Auto Forwarding
Mailbox
Number
272
Installation Manual
Value Range
(Default)
If set to "Yes", the message waiting lamp will illuminate
when unplayed messages remain after the subscriber
(Yes)
has accessed the mailbox for Subscriber Service.
If set to "Yes", the VPS calls the appropriate device in
numerical order until all unplayed messages are
(No)
received.
If set to "Yes", subscribers are able to utilize the External
Message Delivery feature. The sub-parameter to be set
(No)
is Prompt Mode. If set to "No", sub-parameter cannot be
assigned.
When an external message is delivered, the receiver will
be greeted by the VPS in the specified language
(prompt). However, if "Selective" is enabled, then the
receiver has a choice of prompts. See related
(User 1)
explanation in "Incoming Call Service Prompt" in Table
5-5 in 5.3.1 Port Service Menu.
Note
When "Selective" is enabled and the receiver uses a
rotary telephone, the no-entry selection is specified
by "Prompt for Rotary Callers" in Table 5-5 in 5.3.1
Port Service Menu.
If set to "Yes", the VPS automatically forwards messages
that have not been accessed for a specific length of time
(No)
to another mailbox. The sub-parameters to be set for this
feature include Mailbox Number, Delay Time, and
Forwarding Mode. If set to "No", sub-parameters cannot
be assigned.
2-5 digits
Specifies the mailbox to which the messages will be
(None)
forwarded.
Note
The numbers of the System Group Distribution List
cannot be specified as the destination.
Description/Function
Advertisement
Table of Contents
Troubleshooting
