Installation Steps - Panasonic KX-TVS95 Installation Manual

2.5

INSTALLATION STEPS

The following is an overview of the standard installation process using Digital Integration.
When necessary, other sections in this manual have been referenced for more detailed
descriptions or instructions.
1.
Obtain a list of current users, their extension numbers, their departments, and the type of
systems they use (mailbox, no mailbox, beeper, car phone, etc.).
2.
Assess your customers' needs before setting up the system. You will save yourself time
later by giving customers what they need up front. Ask the office manager how the VPS
will be used. Give examples.
Recommend that your customer use a word processor to log the greetings. You will find
these files much more easily than the worksheet pages if you need to make changes
down the road.
3.
Connect the power cord to the VPS.
CAUTION
The power supply cord is used as the main disconnect device. Ensure that the
socket-outlet is located/installed near the equipment and is easily accessible.
4.
Standard Initialization (For Digital Integration Connection)
a)
Program the ports of the PBX for voice processing (see Section 4 INTEGRATING
THE VPS WITH THE PANASONIC KX-T DIGITAL PBX).
b)
Unplug the power cord of the VPS.
c)
Plug station wire(s) from the PBX into VPS (see 2.6 CONNECTIONS).
d)
Connect the personal computer to the VPS with a Null Modem Cable (see 2.7.2
Connecting the RS-232C Cable).
e)
Set the DIP Switch to position 5.
f)
Plug in the power cord of the VPS.
g)
Wait until the "warning" appears on the screen.
h)
Set the DIP Switch back to position 0.
Program the KX-TA624, the KX-TD1232, the KX-TA1232, the KX-TD816, the
KX-TD308, the KX-TD500, the KX-TDA series, or the KX-TAW series for Voice
Mail integration.
• KX-TA624
• KX-TD816, KX-TD1232, KX-TA1232, KX-TD308, KX-TD500, KX-TDA
series, KX-TAW series
Program may be performed on-site or at the office.
All memory is stored and will be retained when the unit is powered up as
long as the DIP Switch has been reset to position [0] prior to turning the
unit off.
2.5 INSTALLATION STEPS
Installation Manual 35