Brake Disc - Husqvarna 2011 TE 630 Workshop Manual

TE
SMS
BRAKES

Brake disc

Checking the brake disc is an important safety procedure; the disc must be
spotless, i.e. free from corrosion, oil or other dirt or deep scoring.
Front brake disc diameter: 260 mm (TE) - 320 mm (SMS)
Front brake disc thickness (when new): 3.0 mm (TE) - 5.0 mm (SMS)
Wear limit: 2.5 mm (TE) - 4.5 mm (SMS)
Rear brake disc diameter: 220 mm
Rear brake disc thickness (when new): 4.0 mm
Wear limit: 3.5 mm
Disc warpage must not exceed 0.15 mm (check disc mounted on the rim with
a dial gauge).
To remove the disc from the wheel rim, you need to loosen the four retaining
screws. On assembly, clean all mating surfaces thoroughly and tighten the screws
H01290
to the specified torque.
H01295
L.4 Part. N. 8000 H2051 (02-2010)