Ignition And Gear Sensor Cable Connection; Rear Stop Connection; Securing The Handlebar Wiring Harness - Husqvarna 2011 TE 630 Workshop Manual

ELECTRICAL SYSTEM

• Ignition and gear sensor cable connection

Connect the ignition (25) and gear sensor (26) connectors as shown.

• Rear stop connection

Connect the wiring connector (27) to the rear STOP sensor.

• Securing the handlebar wiring harness

Strap wiring to handlebar with rubber clips as shown in the figure.
M.48 Part. N. 8000 H2051 (02-2010)