Throttle Body Removal - Husqvarna 2011 TE 630 Workshop Manual

GENERAL PROCEDURES

Throttle body removal

- Remove tank, saddle and left-hand side panel as outlined in the relevant
paragraphs.
- Loosen the clamps (1) securing throttle body (2) to air box hose coupling and
head.
- Disconnect the M.A.Q.S. sensor connector (3) from the throttle body.
- Disconnect the wiring harness connector (4) from the throttle body.
- Loosen screw (5) and remove the cover (6).
E.12 Part. N. 8000 H2051 (02-2010)