Right Crankcase Crankshaft Seal Removal; Crankcase Bearings Removal - Husqvarna 2011 TE 630 Workshop Manual

Right crankcase crankshaft seal removal

- Loosen the screw (1) with an 8 mm wrench and remove the plate (2).
- Remove the seal (3) with a screwdriver.

Crankcase bearings removal

- Remove the retaining plates (1) and (2) from the crankcase halves.
- Heat up the crankcase halves to around 125 °C in a furnace and extract the
bearings using a suitable driver tool.
Part. N. 8000 H2051 (02-2010)
ENGINE DISASSEMBLY
F.35