ELECTRICAL SYSTEM
FuSES
•
When you find a blown fuse (1), always investigate and eliminate the cau-
se before replacing it.
•
Never replace a fuse with another fuse with a different rating.
•
Never use a wire or other makeshift repair techniques instead of installing
a new fuse.
The following fuses are available on the utilities holder plate:
-
Fuse 23, FP- 15A (cable sheath marked "P"): fuel pump, HT coil, lambda
sensor heater, injector;
-
Fuse 23A, FM- 15A (cable sheath marked "M"): 12V depending on ignition
switch (system voltage), parking lights;
-
Fuse 23B, FDC- 20A (cable sheath marked "DC"): electric fan, rear stop
light, high beam, low beam, turning indicators, horn, instrument panel
power supply (instrument functions display).
SEMICONDuCTOR PARTS
•
Be careful to never drop parts that incorporate a semiconductor, such as
the ECU or the voltage regulator/rectifier.
•
Closely follow the relevant instructions when inspecting these parts. An
improper procedure may lead to severe damage.
M.36
Part. N. 8000 H2051 (02-2010)