Bleeding The Clutch System - Husqvarna 2011 TE 630 Workshop Manual

HYDRAULICALLY CONTROLLED CLUTCH

Bleeding the clutch system

A long travel and mushy feel of the clutch lever indicate that there is air in the
system and the clutch hydraulic system needs bleeding.
Bleeding procedure is as follows:
NEVER use brake fluid.
- Remove screws (1), cover (2) and rubber diaphragm;
- Remove the rubber gaiter (3);
- Loosen the nipple (4)
- Connect a hose to a syringe and fit the other end of the hose to the fitting (5)
of nipple (4);
- Add the fluid specified in the LUBRICANT CHART.
- Keep adding fluid until the fluid flowing out of the hole (B) on the pump body
looks CLEAR of air bubbles.
P.6 Part. N. 8000 H2051 (02-2010)