Lambda Sensor Position And Connector; Ignition Switch And Left-Hand Switch Connection; Right-Hand Switch Connection - Husqvarna 2011 TE 630 Workshop Manual

ELECTRICAL SYSTEM

• Lambda sensor position and connector

Tighten the Lambda sensor (20) into its seat.
Connect the Lambda sensor connector (21) as shown.

• Ignition switch and left-hand switch connection

Connect the ignition switch (22) and left-hand switch (23) connec-
tors as shown.

• Right-hand switch connection

Connect connector (24) as shown
Part. N. 8000 H2051 (02-2010) M.47