Optional Charger Damper Re-Tune; Optional Rebound Re-Tune - SRAM BOXXER TEAM 2015 Service Manual

O p t i o n a l C h a r g e r D a m p e r ™ R e - t u n e
The Charger Damper in BoXXer™ comes with additional shims installed on the piston to allow the rider to modify the compression
and/or rebound tunes.
If your rebound setting is one or two clicks from open, we recommend changing to a soft tune on the rebound. If your compression
setting is one or two clicks from open, we recommend changing to a soft tune on the compression.
Conversely, if your rebound setting is one or two clicks from closed, we recommend changing to a firm tune on the rebound. If your
compression setting is one or two clicks from closed, we recommend changing to a firm tune on the compression.
All Charger Dampers in BoXXer ship with the Medium Damper Tune installed.
O p t i o n a l R e b o u n d R e - t u n e
1 Clamp the bottom of the rebound damper shaft into a RockShox®
Rear Shock Vise Block.
To prevent damage to the rebound damper shaft, do not clamp
the middle of the shaft in the vise.
2 Use a 10 mm socket to remove the piston nut. Use your hand to
stabilize the rebound damper shaft.
Use a small wrench or pick to slide the shims off of the rebound
3
damper piston. Set the shims on a rag in the order they came off
of the piston.
N O T I C E
10 mm
Small wrench
Optional Charger Damper™ Re-tune 30