SRAM BOXXER TEAM 2015 Service Manual page 14

Hold the lower leg firmly and use the seal installation tool to push
5
the lower oil seal evenly into the leg until the bottom surface of
the seal is flush with the bottom of the seal pocket.
6 Remove the wire spring from the new dust wiper seal and set the
spring aside.
Insert the narrow end of the new dust wiper seal into the recessed
end of the 35 mm seal installation tool.
7 Hold the lower leg firmly and use the seal installation tool to push
the dust wiper seal evenly into the lower leg until the seal surface
is flush with the top of the lower leg surface.
Reinstall the wire spring onto the dust wiper seal.
Repeat on the other side.
35 mm seal installation tool
35 mm seal installation tool
35 mm seal installation tool
Lower Leg Seal Service 14