Table of Contents
Advertisement
2 0 0 H o u r S e r v i c e
D a m p e r R e m o v a l
1
Remove the damper body air valve cap.
Remove the damper body air valve cap.
Depress the Schrader valve and release all air pressure from the
Depress the Schrader valve and release all air pressure from the
damper.
damper.
Once the pressure has been released, depress the Schrader valve a
Once the pressure has been released, depress the Schrader valve a
second time. If the Schrader valve is able to move, the shock has been
second time. If the Schrader valve is able to move, the shock has been
completely depressurized.
completely depressurized.
If the Schrader valve does not move at all, the shock is still pressurized
If the Schrader valve does not move at all, the shock is still pressurized
and will need to be sent to an authorized RockShox dealer for further
and will need to be sent to an authorized RockShox dealer for further
service.
service.
⚠ CAUTI ON - EYE HAZARD
Verify all pressure is removed from the shock before proceeding.
Failure to do so can cause the damper body to separate from the
shaft eyelet/mount at a high velocity. Wear safety glasses.
2
Remove the Schrader valve core from the damper body air/nitrogen fill
Remove the Schrader valve core from the damper body air/nitrogen fill
port to make sure all air has been removed.
port to make sure all air has been removed.
Thread the Schrader valve core back into the damper body just
Thread the Schrader valve core back into the damper body just
enough to engage the threads. Do not tighten.
enough to engage the threads. Do not tighten.
D a m p e r S e r v i c e
RockShox Schrader valve tool
RockShox Schrader valve tool
Small hex wrench or pick
RockShox Schrader valve tool
29
Damper Service
Advertisement
Table of Contents
