SRAM BOXXER TEAM 2015 Service Manual page 24

13 Use your fingers or a pick to remove the rebound damper seal
head outer o-ring. Use a pick to pierce and remove the scraper
seal.
Use your fingers to install a new o-ring and scraper seal.
14 Use your fingers to remove the glide ring from the rebound
damper piston.
Use your fingers to install a new glide ring. Set the rebound shaft
assembly aside.
Clamp the wrench flats of the coupler into a vice with the
15
cartridge tube oriented upward.
Do not clamp the cartridge tube in the vise.
N O T I C E
Scraper seal orientation
Charger Damper Removal 24