Charger 2 Damper™ Service; 200 Hour Service; Charger 2 Damper Removal - SRAM RockShox RS-1 Service Manual

C h a r g e r 2 D a m p e r ™ S e r v i c e
2 0 0 H o u r S e r v i c e
Use aluminum soft jaws to protect the Charger 2 Damper assembly when using
a vise.
Inspect each part for scratches. Do not scratch any sealing surfaces when
servicing your suspension. Scratches can cause leaks.
When replacing seals and o-rings, use your fingers or a pick to remove the seal or
o-ring. Spray isopropyl alcohol on each part and clean with a rag. Apply grease to
the new seal or o-ring.
Crown Adjust: Turn the lockout adjuster knob to the open, unlocked
1
position.
Crown Adjust: Remove the low speed compression and lockout knob from
2a
the knob base.
C h a r g e r 2 D a m p e r R e m o v a l
NOTI CE
RLC
1.3 mm RLC
Charger 2 Damper™ Service 23