SRAM BOXXER TEAM 2015 Service Manual page 26

Use needle-nose pliers to remove the low speed compression
20
adjuster from the compression top cap.
21 Use your fingers or a pick to remove the o-ring on the low speed
compression adjuster.
Use your fingers to install a new o-ring.
22 Use your fingers or a pick to remove the o-ring from the
compression piston.
Use your fingers to install a new o-ring.
Use your fingers or a 2.5 mm hex wrench to remove the low speed
23
compression needle.
Needle-nose pliers
2.5 mm
Charger Damper Removal 26