O p t i o n a l C o m p r e s s i o n R e - t u n e
1
Clamp the compression piston shaft into a RockShox® Rear Shock
Vise Block.
To prevent damage to the compression piston, position the shaft in
the vise so that the piston is clear of the vise block.
2
Use a 10 mm socket to remove the piston bolt.
Use a small wrench to remove the piston assembly from the
3
compression damper shaft. Set the shims on a rag in the order
they came off of the piston.
N O T I C E
10 mm
Small wrench
Optional Compression Re-tune
33