SRAM BOXXER TEAM 2015 Service Manual page 32

Install the shims on a small wrench or pick in the order of your
5
desired tune. Slide the shim stack onto the piston face. Use your
fingers to squeeze the stack and center the shims.
Ensure the hoop shim is centered on the shim stack.
Thread the main piston nut onto the rebound damper piston. Use
6
a torque wrench with a 10 mm socket to tighten the nut to 3.7 N•m
(33 in-lb).
Ensure the check shim is centered, and not pinched under the
piston.
Remove the assembly from the vise.
N O T I C E
N O T I C E
Off center hoop shim
Centered shim stack
10 mm 3.7 N•m (33 in-lb)
Pinched check shim
Centered check shim
Optional Rebound Re-tune 32