SRAM BOXXER TEAM 2015 Service Manual page 36

Thread the piston bolt onto the compression damper shaft. Use a
7
torque wrench with a 10 mm socket to tighten the nut to 3.7 N•m
(33 in-lb).
Ensure the check shim is centered, and not pinched by the piston
bolt.
Remove the assembly from the vise.
N O T I C E
10 mm 3.7 N•m (33 in-lb)
Pinched check shim
Centered check shim
Optional Compression Re-tune 36