Fork Removal - SRAM BOXXER TEAM 2015 Service Manual

F o r k R e m o v a l
We recommend the following steps to remove your BoXXer™ fork from the bicycle. Removing the fork from the bicycle provides easy
access to internal components and is more convenient than working around a complete bicycle.
1 To assist you with post-service assembly, record the distance from
the top of the upper tube to the top of the lower crown.
2 Use a 6 mm hex wrench to loosen the non-drive side bolt of the
Maxle Lite DH™ until detent clicks are no longer felt.
3 Use a 6 mm hex wrench to remove the Maxle Lite DH from the
drive side of the fork. Pull the wheel down to remove it from the
fork.
27.5" forks: Use a 2.5 mm hex wrench to remove the brake hose
4
from the hose brace on the fork arch.
26" forks: Use a diagonal cutter to cut the cable tie holding the
brake hose to the fork arch.
Remove the brake caliper according to the brake manufacturer's
instructions.
6 mm
6 mm

Fork Removal

8