Table of Contents
Advertisement
Section 700 - Operation
Operation
To automatically redial the last number dialled:
1. Lift the handset or press the ON/OFF key.
OR...
Press a vacant trunk key or enter a exchange line access
code (default = 9 or 81-84).
FL/R
2. Press the
3. Complete the call and replace the handset or press the ON/
OFF key.
Hardware Requirements
•
N/A
Considerations
•
Extension Class of Service (COS) determines whether Last Number Redial can be used for both
intercom and trunk calls or trunk calls only.
Line Appearances
Description
The System provides three types of line appearances
•
Direct Station Select (DSS) / Busy Lamp Field (BLF) Appearances
•
Direct In Line (DIL) Appearances
•
Multi-Exchange (CO) Line Appearance
DSS/BLF Appearances
When a DSS/BLF key is programmed, it automatically provides one-touch dialling and DSS and BLF
for the assigned extension numbers. If desired, the DSS/BLF key can also provide ring or delayed ring
monitor. For example, you can set extension A as a DSS/BLF ringing key on extension B. When
extension A rings, the LED of the DSS/BLF key on extension B flashes and the phone rings.
Ringing or delayed ringing can be set on extensions which have a BLF key. The LED of the DSS/BLF
key flashes green during ringing and the display shows the BLF extension number.
When extension A is in use, the LED of the DSS/BLF key on extension B lights red. If one extension
has the Call Forwarding or Do-Not-Disturb (DND) feature activated, the DSS/BLF key lights green.
S-ICX-64-700
Action
key.
S-ICX (International) issued April 2002
Chapter 5. Key Telephone Features
Result
• Outside dial tone
• CO XXX displays (where XXX =
exchange line number)
Last number dialled displays
Line key LED turns red, then goes off.
169
Advertisement
Table of Contents
