Table of Contents
Advertisement
Chapter 7. SLT Features
Operation
To set up the monitored extension:
1. Dial the monitored extension access code (default 775)
Note: The handset must be off-hook to activate the
Room Monitor feature.
When a monitored extension receives a call, the caller hears a busy tone. Additional operations may
be performed from the monitored extension when it is in monitored mode:
1. Placing the handset back on-hook
2. Pressing digits 0-9, *, #
3. FL/R
It is not possible to monitor an extension from an SLT telephone.
Hardware Requirements
•
N/A
Considerations
•
Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.
•
If the monitored extension is placed on-hook while Room Monitoring is activated, the
monitoring extension will hear a fast busy tone.
•
If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored
extension will remain in the monitored mode, and can be accessed by any other extension
allowed to access the room monitoring mode.
•
A room cannot be monitored from more than one extension at a time. If an attempt is made to
monitor an extension while the extension is being monitored, the user will hear a fast busy tone.
•
ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or
monitored modes.
•
A monitoring extension cannot forward a call on hold to a monitored extension.
•
A monitored extension cannot receive a transferred call.
Speed Dialling
Description
The System supports the following speed dial features:
•
Personal Speed Dial (PSD)
294
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
You will hear a confirmation tone after
the monitored extension has enabled the
Room Monitor feature.
Result
Monitored mode is cancelled. Extension
returns to idle.
No response is given. Extension remains
in monitored mode.
Monitored mode is cancelled. Dial tone is
returned to handset.
S-ICX-64-700
Advertisement
Table of Contents
