Table of Contents
Advertisement
Chapter 6. DSLT Features
Code users can "float" from phone to phone, placing calls that would normally be restricted on that
phone.
Non-Verified Account Codes
Non-Verified Account codes are voluntary codes. (i.e., You do not have to enter an account code
before making a call.)
You can assign Non-Verified Account codes to both incoming and outgoing calls. To assign an
account code to an outgoing call, you enter the account code before making the call or during the call.
To assign an account code to an incoming call, you enter the account code during the call.
Operation
To enter an account code before making a call:
1. Lift the handset or press the ON/OFF key.
2. Enter the Account Code feature code (default = 8#).
3. Enter the Account Code (up to 10 digits).
4. Press the # key.
5. Press a vacant trunk key or enter an exchange line access
code (default = 9 or 81-84).
6. Dial the phone number.
To enter an account code during an outside call:
1. During a call, press the MEMORY key.
2. Press the # key.
3. Enter the Account Code (up to 10 digits).
4. Press the # key.
Verified Account Codes
Stations restricted from outside call origination by Toll Restriction Service (TRS) - Call Barring can
be allowed to make outgoing calls by entering a Verified Account code that changes the TRS (Call
Barring). After a call is made, the Call Logging record for the call will show the verified account
code.
218
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Intercom dial tone
Result
S-ICX-64-700
Advertisement
Table of Contents
