Line Appearances - Panasonic DBS 40 Operating Manual

Section 700 - Operation
Considerations

Line Appearances

Table 4-7. MC0 and ML key definitions
Direct Line (DL)
Appearances
Appearances
Multi-Line (ML)
Appearances
Technical Manuals Online! - http://www.tech-man.com
2. Press the REDIAL key.
The last number dialed appears on the display.
3. Complete the call and replace the handset.
The line key LED changes from green to red and then goes off.
If the Auto Flash Redial feature is set, you can flash the outside line once
l
by pressing the REDIAL key at the busy tone. You can then redial the last
number dialed.
The Last Number Redial feature can redial a nurnber up to sixteen digits
l
long.
A maximum of five chained Speed Dialing codes can
l
"One-Touch Keys" on page 4-73 for more information.
The DBS provides up to four types of line appearances, depending on the
CPC version used.
The following table summarizes how each type of line appearance is used:
Definition
(DSS), and busy lamp fields (BLF) for extensions.
DL keys are used to originate and receive calls over specific trunk
numbers.
ML keys are used to originate and receive CO line calls and intercom
calls.
Chapter 4. Key Telephone Features
redialed. See
be