Panasonic S-ics Technical Manual page 160

Chapter 5. Key Telephone Features
• The RELEASE key functions as listed in the table below.
Status
Idle --
Monitor ON Several held calls
(speaker) or Headset
Mode
No held calls
Handset Off-Hook Several held calls
No held calls
Table 18. Feature access codes for FF key assignments
Note: TMI is the abbreviation for Taiwan, Malaysia, Indonesia.
Feature Description
Trunk Key
MCO Key
Virtual Port Key
BLF/DSS Outgoing
BLF/DSS Immediate Ring
BLF Delayed Ring
BLF/DSS-No Ring
2-Way Box for CCU 1
2-Way Box for CCU 2
2-Way Box for CCU 3
2-Way Box for CCU 4
2-Way Box for CCU 5
2-Way Box for CCU 6
2-Way Retrieve Messages
2-Way Access
2-Way End
2-Way Re-Record
2-Way Pause
2-Way Store
2-Way Add
2-Way Cancel
2-Way Notify
2-Way Copy
160
Condition Operation when RELEASE key is pressed
Ignore.
Latest held call will be transferred; phone returns to idle sta-
tus (Monitor OFF).
Current call (talk) will be released; phone returns to idle sta-
tus (Monitor OFF).
Latest held call will be transferred; phone gets internal dial
tone.
Current call (talk) will be released; phone gets internal dial
tone.
REDIAL + Fixed Feature
Code + (additional digits to
program into key)
# + (Exchange Line 1-96)
1 + (Auto-Select Pattern 1-5;
MCO-Incoming Trk Grp 00-99)
∗9 + (Virtual Port 001-96)
9 + (Extension 0-9999)
81 + (Extension 0-9999)
82 + (Extension 0-9999)
83+ (Extension 0-9999)
61 + (box no.)
62 + (box no.)
63 + (box no.)
64 + (box no.)
65 + (box no.)
66 + (box no.)
5 + (box no.)
∗#50
∗#51
∗#52
∗#53
∗#54
∗#55
∗#56
∗#57
∗#58
S-ICX (International) issued April 2002
Section 700 - Operation
Default Flexible Feature Code
(if not listed, must use Fixed Feature
Code)
S-ICX-64-700