About User Programming - Panasonic S-ics Technical Manual

Section 700 - Operation

About User Programming

User Maintenance requires a Digital Display Key Telephone assigned to a Class of Service (COS)
that allows User Maintenance.
The procedures in the following sections describe the basic steps used for modifying parameters.
However, there are many alternative ways to view and modify the parameters using special keys and
procedures. Some of the more advanced keys include:
REDIAL
FL/R
ON/OFF
HOLD
PROG
CONF
MEMORY
MENU
PREV
NEXT
VOLUME (down) Scrolls through the same address level (ascending)
VOLUME (up)
FF1
FF2
FF3
FF4
FF5
FF6
FF7
FF8
FF9
FF10
Note: Once in a data entry level, you must either enter an acceptable value or restore the previous
value before proceeding. For instance, if you change an entry to an unacceptable value and then press
FF1 to move to the PSD Assignment menu, you will not be able to proceed. You must first enter an
acceptable value.
Operation
To enter User Maintenance mode:
1. At a telephone with a COS that allows user login, press the
ON/OFF key.
2. Press the PROG key.
3. Press the * key twice (* *).
4. Press the CONF key.
S-ICX-64-700
(At menu level) clears an entry
(At data entry) retrieves the last entry setting
(At menu level) ignored
(At data entry) clears setting
Begins programming log-in or exits programming
(At menu level) moves to date and time
(At data entry) saves the displayed setting and moves to the next setting
Moves to the 81 User Maintenance Menu
Moves to the first data setting
Backs out of the address menu levels
Ignored
(At menu level) moves to the previous screen
(At data entry) ignored
(At menu level) moves to the next screen
(At data entry) ignored
Scrolls through the same address level (descending)
PSD Assignment menu
SSD Assignment menu
Extension Name menu
Verified ID Code menu
Call Forward ID Code menu
Message Key ID Code menu
System Mode menu
Walking /Station Lock TRS (Call Barring)
TRF of CWRD
CID Logging Ext.
Action
S-ICX (International) issued April 2002
Chapter 4. User Maintenance
Result
81-
User MAINT displays
79