Table of Contents
Advertisement
Chapter 7. SLT Features
Operation
To use a Walking TRS (Call Barring) COS code:
1. Lift the handset or press the ON/OFF key of an extension
other than your own.
2. Enter the Walking TRS (Call Barring) Access code (default
= 87).
3. Dial your extension number.
4. Enter your Walking TRS COS code (0001-9999)
5. Enter a an exchange line access code (default = 9 or 81-84).
6. Dial the phone number.
7. Replace the handset or press the ON/OFF key.
Hardware Requirements
•
N/A
Considerations
•
The same Walking TRS (Call Barring) COS code can be used on more than one extension.
•
Walking TRS (Call Barring) COS mode is kept until the user goes on-hook.
•
ARS and TRS (Call Barring) dialling privileges follow the Walking TRS (Call Barring) COS.
•
Before entering a new Walking TRS (Call Barring) COS code, you must first clear the existing
code.
•
When Walking TRS (Call Barring) COS is used, Wxxxx (where xxxx is the user's extension
number) appears in Call Logging.
304
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Intercom dial tone
Walking TRS (Call Barring) COS
remains in effect until you replace the
handset.
S-ICX-64-700
Advertisement
Table of Contents
