Set System Speed Dial Numbers - Panasonic S-ics Technical Manual

Section 700 - Operation
Hardware Requirements
• N/A
Considerations
• N/A

Set System Speed Dial Numbers

Description
For a description of System Speed Dial (SSD), see "System Speed Dial" on page 189 for a Digital
Key Telephone, "System Speed Dial" on page 252 for a Digital Single Line Telephone (DSLT), and
"System Speed Dial" on page 296 for a Single Line Telephone (SLT).
Operation
To set SSD numbers:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 02.
3. Press the HOLD key.
4. Press the HOLD key.
5. Press the HOLD key.
6. Enter the SSD bin number (00-79 or 000-799).
7. Press the HOLD key.
8. Enter the SSD digits to be dialled.
Note: Press the FL/R key to clear an entry or any existing
data.
9. Press the HOLD key to store the entry.
10. To set additional SSD numbers, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
11. Repeat steps 8-10 until all SSDs are entered.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
S-ICX-64-700
Action
S-ICX (International) issued April 2002
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8102-
SSD Assignment displays
0 :
SSD Number displays
Enter SSD # displays
-SSDXXX XXX displays (where
XXX = SSD bin number)
Next SSD bin number displays
Desired SSD bin number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
111