Floating Hold (Retrieve Only); Floating Hold - Panasonic S-ics Technical Manual

Section 700 - Operation
Operation
To place a call on System Hold:
1. While on a call, hookflash.
To retrieve a call placed on System Hold:
1. If onhook, go offhook.
2. Hookflash.
To retrieve a held call on a specific exchange line:
1. Lift the handset.
2. Enter the Specified Exchange Line Answer code (default =
*0).
3. Enter the exchange line number.
Hardware Requirements
• N/A
Considerations
• N/A

Floating Hold (Retrieve Only)

Floating Hold allows calls to be placed in a hold orbit (position) for retrieval elsewhere in the system.
Floating Hold is most commonly used by the attendant group when they are unable to locate the
desired party. If the desired party does not answer his/her phone, the attendant places the caller on
Floating Hold and asks over the paging system that the desired party dial *9XXX to retrieve the held
call.
Note: Single Line Telephone (SLT) positions are not able to place a call on Floating Hold.
However, an SLT can retrieve a call on floating.
S-ICX-64-700
Action
Action
Action
S-ICX (International) issued April 2002
Chapter 7. SLT Features
Result
Intercom dial tone
Result
Intercom dial tone
Retrieve call
Result
Intercom dial tone
275