Table of Contents
Advertisement
Chapter 6. DSLT Features
Operation
To link multiple SSD numbers to a PSD bin:
1. Determine the SSD bin numbers to be linked
2. Lift the handset or press the ON/OFF key.
3. Enter the Speed Dial Set/Clear code (default = 710).
4. Enter the PSD bin number (80-99).
5. Press the MEMORY key.
6. Enter the SSD bin number (00-79 or 000-799) that contains
the first part of the number to be called.
7. Repeat steps 5-6 up to 5 more times for all additional SSDs
to be dialled.
8. Press the HOLD key when finished.
To use a PSD that links multiple SSDs:
1. If necessary, select the exchange line group (default = 9 or
81-84). (Normally the exchange line is selected by the speed
dial numbers.)
2. Press the MEMORY key.
3. Enter the PSD bin number (80-99).
To manually link speed dials together:
1. Lift the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. Press the MEMORY key, then enter the PSD or SSD bin
number.
4. Press the MEMORY key and enter the PSD or SSD codes
to dial the parts of the phone number until it is completed.
Hardware Requirements
•
N/A
Considerations
•
N/A
254
Action
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Result
Result
Intercom dial tone
Outside dial tone
S-ICX-64-700
Advertisement
Table of Contents
