Phase 6.1 - Panasonic S-ics Technical Manual

Section 700 - Operation
VM Transfer key enhancement
The VM transfer key works over the centralized Voice Mail system. When the key telephone presses VM
transfer key and enters VM ID code, the system can automatically transfer the calling party or the held party
to the centralized VM, and send VM ID code to the centralized VM by DTMF tone.

Phase 6.1

Qsig Enhancement
Phase 6 provides enhances Qsig features to include many of the Network Facilities previously available
only on AC15 or E&M network.
Calling Party ID / Caller Name Display
Caller ID information can be seen for calls placed across Qsig lines.
Network Call Hold / Retrieve
Network Call Hold feature is available for calls across Qsig lines.
Network Call Transfer
Network Call Transfer feature is available for calls across Qsig lines.
Network Hold Recall
The Network Call Hold feature is available for calls across Qsig lines.
Network Transfer Recall
Network Call Transfer feature is available for calls across Qsig lines.
Network Call Forward
Network Call Forward feature is available for calls across Qsig lines.
Network Call Forward ID
Voice Mail ID can be sent to Centralized Voice Mail across Qsig lines when the Network Call Forward
feature is used.
Message Wait Lamp Control
Message Wait lamp lights across Qsig lines after a message to Centralized Voice Mail is placed by a
caller.
Network Message ID Sending
MSG or MSG/ VM key can be pressed to retrieve a message placed by a caller across Qsig lines.
Network Camp On
Network Camp On feature is available for calls across Qsig lines.
Note: Because of Manufacturer Supplementary Service (protocol), the connection with other PBX is not
guaranteed.
S-ICX-64-700 S-ICX (International) issued April 2002
Chapter 1. System Programming (FF1)
311