Day/Night System Mode - Panasonic S-ics Technical Manual

Section 700 - Operation
Depending on the day of the year, the system will set the time according to the following:
Day of the year
Last Sunday in March
Last Sunday in October
Hardware Requirements
• N/A
Considerations
• Daylight Saving Time can only be enabled or disabled in system programming. See Section 400:
Programming for more information.

Day/Night System Mode

Description
Day/Night System Mode enables you to switch the System between two Day modes and a Night
mode. These modes determine incoming call handling, Toll Restriction Service (TRS) (Call Barring)
call handling, and attendant group support.
While in a Night mode (generally used at night or any time when your office is closed), incoming
calls can ring at selected extensions (e.g., a night watchman's extension or an extension connected to
an answering machine). Outbound calls can be restricted to certain phones. Calls can be directed to a
night-time attendant group instead of the normal daytime attendant group.
The System provides one Night mode for night call handling. However, there are three night feature
access codes (Night, Night 1, and Night 2). These three codes may be used to provide different two-
way Voice Mail messages (i.e., Night may select one message, Night 1 may select a different
message, and Night 2 may select a third message.)
Typically, the Day mode is used for normal call processing of outside calls, TRS (Call Barring) calls,
and attendant calls. The second day mode (Day 2) may be used for alternative call handling such as
during a lunch break, etc.
There are two ways to change day/night service modes:
• Manually
• Automatically
The following table lists the impact on TRS (Call Barring), Ringing, Attendant, and Built-in Voice
Mail in the various system modes:
Table 7. System Mode Impact on TRS (Call Barring), Ringing, Attendant, and Built-in Voice Mail
SYSTEM
TRS (Call Barring)
MODE
Day 1 Day TRS Mode
Day 2 Day TRS Mode
(Same for Day 1 and
Day 2)
S-ICX-64-700
System clock adds one hour to current time at
System clock subtracts one hour from current time at
RING
Day 1 Ring Pattern
Day 2 Ring Pattern
S-ICX (International) issued April 2002
Chapter 3. System Features
System Action
BUILT-IN
ATTENDANT
VOICE MAIL
Day 1 Attend. Group Day 1 Message
Day 2 Attend. Group Day 2 Message
Handling
1 a.m.
1 a.m.
35