Table of Contents
Advertisement
Section 700 - Operation
DP to DTMF Signal Conversion
Description
Dial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch from
DP to DTMF signalling when using a DP exchange line. For instance, if you dial into a Voice Mail
system using a DP exchange line, you can switch to DTMF signalling to communicate with the Voice
Mail system. (The System can automatically change DP to DTMF tones based on the incoming and
outgoing timers).
Operation
To switch from DP to DTMF dialling:
1. Press the * key or the # key.
Hardware Requirements
•
N/A
Considerations
•
N/A
Flash
Description
You can send a flash signal on your telephone to release an outside line and then either automatically
reseize the same outside line or switch to extension dial tone status by pressing the FLASH key.
Exchange Line programming determines whether your phone reseizes the outside line or switches to
extension dial tone status.
Hardware Requirements
•
N/A
Considerations
•
N/A
Hot Line
Description
Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number
simply by lifting the handset. You do not have to dial any digits.
S-ICX-64-700
Action
S-ICX (International) issued April 2002
Chapter 6. DSLT Features
Result
241
Advertisement
Table of Contents
