Section 700 - Operation
Trunk Access
Description
The System supports the following ways to seize an idle exchange line to make an outside call:
•
Direct Exchange Line Access
•
MCO Exchange Line Access
Direct Trunk Access
Extensions can seize a specific exchange line for outgoing calls. Extensions can also use Direct
Exchange Line Access to test exchange lines or to access data exchange lines.
Operation
To use Direct Exchange Line Access:
1. Lift the handset.
2. Enter the Direct Exchange Line Access code (default = 88).
3. Enter the desired exchange line number.
4. Dial the phone number.
Hardware Requirements
•
N/A
Considerations
•
N/A
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle
exchange line from the MCO exchange line group by entering the MCO access code.
Operation
To seize an idle exchange line:
1. Lift the handset.
2. Enter the desired exchange line access number (9 or 81-84).
(See Table 24 on page 302.)
3. Dial the phone number.
Hardware Requirements
•
N/A
S-ICX-64-700
Action
Action
S-ICX (International) issued April 2002
Chapter 7. SLT Features
Result
Outside dial tone
Result
Intercom dial tone
Outside dial tone
301