Table of Contents
Advertisement
Section 700 - Operation
To park a call at another extension:
1. Press the HOLD key.
2. Enter the Call Park Transfer access code (default = 774).
3. Dial the extension number to receive the parked call,
4. OR
5. Press the BLF key
6. If necessary, page the party that needs to retrieve the call.
To retrieve a transferred call park:
1. At the extension with the transferred park call, lift the hand-
set or press the ON/OFF key.
2. Enter Call Park Answer/Self access code (default = 772).
Hardware Requirements
•
N/A
Considerations
•
You cannot park more than one call at a time.
•
Call Park functions can be assigned to FF keys (see "Flexible Function Keys" on page 158).
•
No more than one Call Park Answer key may be assigned to a single telephone.
•
A Call Park Answer key may not be assigned to the EM/24 or DSS/72 console.
•
If a call is parked by Call Park key, the LED flashes.
•
LCD softkeys are also available for Call Park.
•
Once a call is parked, it cannot be accessed by the trunk key or direct trunk access (similar to
exclusive hold).
•
If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
•
Depending on the Station/Floating Park Hold Pickup setting (FF1-0-02-0025), the call pickup
access code can set to *9 (default), 773. The "*9" access code operates as follows:
System Size
96
S-ICX-64-700
Action
Action
Virtual Line Number and Operation
01-09: Floating Hold pick up
10-96: For Station Park Hold pick up purpose
S-ICX (International) issued April 2002
Chapter 5. Key Telephone Features
Result
• Current call on hold
• CO HOLD #XX displays (where XX =
exchange line number)
Enter TRNS EXT # displays
Park (ext#) displays on lower display
Result
Intercom dial tone
• CO TALK TRK #XX displays (where
XX = line number)
• Connected to parked call
137
Advertisement
Table of Contents
