Section 700 - Operation
•
Only one supervisor can initiate Silent Monitor on an individual extension at any
given time.
•
Display telephones can initiate Silent Monitoring. SLTs cannot initiate Silent Monitoring.
•
Display telephones and SLTs can be monitored.
•
A supervisor cannot initiate Silent Monitoring on an extension when that extension is on a
conference call.
Speed Dialling
Description
The System supports the following speed dial features:
•
Personal Speed Dial (PSD)
•
System Speed Dial (SSD)
•
Speed Dial Linking
•
Speed Dial Name Assignment
Personal Speed Dial
You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored
in PSD bins numbered 80-99.
You can assign up to 10 PSD numbers to the one-touch keys on a non-display or small-display phone,
and up to 20 PSD numbers to the soft keys on a large-display phone. Once the PSD numbers have
been assigned, you dial them by pressing the appropriate key. (For additional information, see "One-
Touch Keys" on page 179.)
You can also enter a name up to 7 characters for each of the PSD numbers. This allows PSD numbers
to be confirmed by name rather than by number.
Operation
To assign PSD numbers:
1. Lift the handset or press the ON/OFF key.
2. (A) Press the PROG key.
(B) Press the MEMORY key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Dial the phone number.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
S-ICX-64-700
Action
S-ICX (International) issued April 2002
Chapter 5. Key Telephone Features
Result
Intercom dial tone
Enter Spd Dial displays
Stored Spd Dial displays
187