Panasonic S-ics Technical Manual page 180

Chapter 5. Key Telephone Features
To assign an System Speed Dial (SSD) numbers to a one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. Press the MEMORY key.
5. Enter the SSD bin number to be programmed.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
To chain 2 to 6 SSD numbers to a single one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. Press the MEMORY key.
5. Enter the SSD bin number that contains the first part of the
number to be dialled.
6. If a pause is required, press the FL/R key
7. Repeat steps 4-5 (up to 5 more times) for each additional
speed dial number to be chained.
8. Press the HOLD key.
9. Replace the handset or press the ON/OFF key.
To assign a feature code or extension number to a one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. If the System is set for MCO Code level, press the following
keys MEMORY * #. Otherwise, proceed to step 5.
5. Enter the desired feature code or extension number.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
180
Action
Action
Action
S-ICX (International) issued April 2002
Section 700 - Operation
Result
Intercom dial tone
Result
Intercom dial tone
• Pause occurs between access code and
telephone number
• R displays
Result
Intercom dial tone
S-ICX-64-700