Chapter 7. SLT Features
Operation
To make an outside call that requires an account code:
1. Lift the handset.
2. Enter the Verified Account ID code (default = 8#).
3. Enter the Account Code (max. 10 digits).
4. Press the # key.
5. Enter an exchange line access code (default = 9 or 81-84).
6. Dial the phone number.
Hardware Requirements
•
A Call Logging printer or external call accounting system is required to collect account code
records.
Considerations
•
Account codes are not available during conversation recording mode for the Built-In Voice Mail.
•
Even though up to 10 digits may be entered, the system verifies the ID based on the first 4 digits
only.
•
Account codes will be cancelled after using trunk queuing.-
•
Account codes are not available for a Dial Pulse SLT.
•
SLT telephones can only use account codes with outgoing calls only.
•
Account Codes interact with TRS (Call Barring) as shown in the following table:
Forced or Not Forced
Not Forced
Forced
268
Action
Verified or
Non-Verified
Non-Verified
Extension Port Based TRS
Verified
Non-Verified
TRS (Call Barring) Class
for Forced Account Code
Verified
S-ICX (International) issued April 2002
Intercom dial tone
TRS (Call Barring) Class
No Account Entry
Extension Port Based TRS
Class
Account Code Based TRS
Extension Port Based TRS
(FF1 0 19 0001)
Account Code Based TRS
Section 700 - Operation
Result
Account Entry
(Call Barring) Class
(Call Barring) Class
(Call Barring) Class
(Call Barring) Class
S-ICX-64-700