11. Remove the Clevis Pins from the left and right Transfix Load Arms to release the Transfix
Roller assembly from the chassis.
Figure 3 Removing the Preheater Lift Solenoid
14. Remove the screw that secures the Transfix Load Module Ground Strap.
Figure 2 Removing the Transfix Load Arm Clevis Pins
12. Disconnect the Preheater Lift Solenoid
P/J202
from the harness.
13. Remove the screw that secures the Preheater Lift Solenoid to the Transfix Load Module.
Initial Issue
Repairs and Adjustments
09/2007
REP 2.0.15
Phaser 8860/8860MFP Service Manual
4-37