Figure 5 Head Tilt Spring Alignment
4.
Seat the gear by lifting the Head Tilt Solenoid Actuator.
5.
Replace the KL-Clip on the end of the Head Tilt Gear Shaft.
6.
Perform the Head Tilt Gear
(ADJ
adjustments before restoring system power.
Repairs and Adjustments
REP 4.0.16, REP 4.0.18
4.13.1), and Process Drive Alignment
REP 4.0.18 Fax Speaker (8860MFP)
Parts List on
PL 4.0
Removal
1.
Remove the Scanner Assembly with attached DADF
2.
Remove the Output Tray
3.
Remove the Left Side Cover
4.
Disconnect the Speaker.
5.
Remove the 2 (metal) screws that secure the Speaker to the Exit Elevator Motor bracket.
(ADJ
4.7.1)
09/2007
4-62
(REP
1.0.11).
(REP
1.0.6).
(REP
1.0.7).
Figure 1 Removing the Speaker
Phaser 8860/8860MFP Service Manual
Initial Issue