27,0Xx.6X Profile Library; 29,0Xx.6X Jam Manager Faults - Xerox Phaser 8860 Service Manual

27,0XX.6x Profile Library

A profile library error has occurred. The following troubleshooting procedure applies to these
errors:
Profile Library Faults
27,0xx.6x A printing process fault occurred during operation.
Initial Actions
• Reset NVRAM and retest.
• If the problem persists, follow the procedure below.
Troubleshooting Procedure
Check system ground integrity.
Error Messages and Codes
27,0XX.6x, 29,0XX.6x

29,0XX.6x Jam Manager Faults

A software error has occurred. The following troubleshooting procedure applies to these errors:
29,0XX.6x Jam Manager program faults.
Initial Actions
• Reset NVRAM and retest.
• If the problem persists, follow the procedure below.
Primary Causes
The troubleshooting table lists parts and wiring referenced in the troubleshooting procedure.
Table 1 29,0xx.6x Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack References
NVRAM, PL 5.0
Troubleshooting Procedure
Table 2 Jam Manager Faults Troubleshooting Procedure
Step Questions or Actions
1 Reseat all Electronics Module connec-
tions.
Does the problem persist?
2 Check ground integrity.
Are the system grounds connected?
09/2007
2-36
Jam Manager Faults
Yes No
Go to Step 2. Complete.
Reset NVRAM. If the Reconnect the sys-
error persists, tem grounds.
replace the NVRAM
device (REP 5.0.9).
Phaser 8860/8860MFP Service Manual
Initial Issue