Modular L3 Ethernet Switch User's Guide
The IPX tab displays the following parameters:
IPX RIP Table – Maximum number of routing table entries allowed for this
table.
IPX SAP Table – Maximum number of server entries allowed.
Max IPX FFT Entries – Maximum number of IPX Fast Forwarding table entries
allowed.
Max IPX System FFT Entries – Maximum number of IPX entries that can be
entered into the system.
IPX FFT Upper Limit (percents) – Maximum percentage of entries the device
can hold in FFT whiteout flowing.
IPX FFT Lower Limit (percents) – Minimum percentage in which the device
would stop the overflowing process.
To display the Device Tuning window IPM tab:
1.
Display the General tab.
2.
Select the IPM tab. The IPM tab opens:
Figure 6- 220. Device Tuning window IPX tab
267