D-Link DES-6300 User Manual page 166

Modular L3 Ethernet Switch User's Guide
The IP Redundancy Table displays the following parameters:
Interface IP Address – The IP address on which the redundancy feature is
running.
Main Router Address – The router IP address that the device is backing up.
Operating Status – The entry status:
Active – The backup router is active on this interface.
•
Inactive – The backup router is not active on this interface.
•
Poll Interval – This router-polling interval, in seconds. If the interval is 0 then the
router is not polled.
Time Out – The interval in seconds during which the router must signal. If the
router does not signal within this interval it is considered non-operational. If Time
Out is equal to 0, the device ignores the row.
To add an IP Redundancy Table entry:
1. Display the IP Redundancy Table.
2. Click . The IP Redundancy Table Insert window opens:
Figure 6- 117. IP Redundancy Table Insert window
3. Complete the fields.
4. Click .
5. Close the IP Redundancy Table Insert window. The IP Redundancy Table opens.
6. Click . When the Status field displays "Finished!", the fields are confirmed as
modified.
To edit an IP Redundancy Table entry:
157