Modular L3 Ethernet Switch User's Guide
Figure 6- 69. Spanning Tree Parameters window General Parameters tab
The Spanning Tree Parameters window displays the following fields:
General Parameters – Defines general information about the Spanning Tree
Mode on a device or VLAN, including the protocol specification, and if a port
must belong to a VLAN. These parameters can be modified.
Bridge Setup Parameter – Identifies the root bridge's parameters.
Root Parameters – Contains information regarding the root. These fields are
grayed out and cannot be modified. The fields appearing in this tab are grayed out.
STP Setup Parameters – Contains information regarding the STP Setup. These
fields are grayed out and cannot be modified.
The General Parameters tab displays the following fields:
Global STP Status – Indicates the STP status. The possible values are:
•
•
Protocol Specification – Indicates the protocol type. This field is a read only.
Must belong to VLAN – Indicates if ports must belong to a defined VLAN. The
possible values are:
•
STP mode.
•
not a VLAN was defined.
Enabled – STP is enabled.
Disabled – STP is disabled.
True – Indicates that ports must belong to a defined VLAN to be in the
False – Indicates that each port of a device is in STP mode, whether or
109