D-Link DES-6300 User Manual page 270

Modular L3 Ethernet Switch User's Guide
On the Menu Bar, click Statistics. On the Statistics menu, click Traps Table.
The General Options window opens. The default tab is General Traps Table.
2. If the Configuration tab is open, click the traps icon in the left pane.
The General Traps Table opens in the right panel.
To view the Trap Files:
On the General Options - General Traps Table window click. The Saved traps window opens:
The columns displayed in the Saved traps window are the same as displayed in the General
Options - Traps Table.
There are two types of Saved traps tables:
Autotrap File
Trap File
To view the device front panel from the trap source:
Double-click a trap in the Traps Table to open the device front panel view that sent the trap.
To set an alarm when receiving traps:
Click the "Beep when a trap arrived" checkbox to hear the beep every time a new trap arrives.
Figure 6- 215. Saved traps window
261