D-Link DES-6300 User Manual page 100

Modular L3 Ethernet Switch User's Guide
Figure 6- 52. GVRP Port Timers Control window
The GVRP Timers Control window displays the following parameters:
If Num – Indicates the port number for which GVRP is enabled.
Join Time – Indicates the time in milliseconds that PDUs are transmitted.
Leave Time – Indicates the time lapse in milliseconds that the device waits
before leaving its GVRP state. The Leave Time is activated by a Leave All Time
message sent/received, and cancelled by the Join message received.
Leave All Time – Used to confirm the port within the VLAN. The time in
milliseconds between messages sent.
To Edit a Timer Control:
1. Display the GVRP Port Timers Control window.
2. Select an entry in the GVRP Port Timers Control table.
3. Click . The GVRP Port Timers Edit window opens:
91