D-Link DES-6300 User Manual page 71

Modular L3 Ethernet Switch User's Guide
3. Complete the fields.
4. Select a device port from the list displayed above the Selected Port Table. The selected
port is added to the table where the following parameters are displayed:
VLAN Port Number – The selected port interface number.
VLAN Port Type – Either static or dynamic.
Tagging – Identifies the VLAN to which the frame belongs. To enable port
tagging check the Enable port tagging checkbox.
Forbidden Egress Ports – Indicates ports that are forbidden to be included in the
Egress Ports List for this VLAN.
5. Click to apply the new data.
6. Close the VLAN Table Insert window.
To delete ports from the Port Table:
1. Display the VLAN Table window.
2. In the VLAN Table window, click
3. Highlight the port numbers of the ports you want to delete in the Port Table.
Figure 6- 28. VLAN Insert Table
. The VLAN Table Insert window opens.
62